Frequently Asked Question

The process of making liquid soap using the ingredients you mentioned generally involves the following steps:

1. Safety First: Wear appropriate protective gear, including gloves, eye protection, and a mask, as lye can be corrosive and harmful if not handled properly.
2. Dissolve Lye: In a well-ventilated area, slowly add lye to cold water while stirring constantly. The mixture will heat up and release fumes, so it's crucial to do this in a safe and ventilated environment.
3. Cool Lye Solution: Allow the lye solution to cool down to room temperature before proceeding further.
4. Combine Oils and LABSA: In a separate container, combine the liquid soap base (LABSA) with the desired oils. The type and amount of oils used will determine the properties of the final soap.
5. Add Lye Solution Gradually: Slowly add the cooled lye solution to the oil mixture while stirring constantly. The mixture will start to thicken and saponify, forming soap.
6. Add Sodium Silicate: Add sodium silicate to the soap mixture. This helps stabilize the soap and gives it a more gel-like consistency.
7. Add Salt (Optional): Adding salt to the soap mixture can help harden the soap and make it easier to mold.
8. Stir and Blend: Continue stirring and blending the mixture until it reaches the desired consistency. It may take some time and effort to achieve the right texture.
9. Cure the Soap: Once the soap has been made, pour it into molds or containers and allow it to cure for several weeks. Curing allows the soap to harden fully and develop its final properties.

Remember, making liquid soap involves working with potentially hazardous chemicals. Always prioritize safety by wearing appropriate gear, working in a well-ventilated area, and following the instructions carefully. If you are unsure or uncomfortable with any part of the process, it's best to seek guidance from a professional or consult reliable resources specializing in soap making.